MENU
Apply for job

Fabricator

19 / 07 / 22 |

Atlas Staffing

Apply Now

FABRICATOR

JOB SUMMARY
An entry-level position in a production environment with no prior experience required. In this area you’ll form sheet metal into cylindrical and conical products, prep and fabricate stainless steel pipe and fittings for welding.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.  
Other duties and related work may be assigned as necessary.
Under close supervision you’ll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following:
•    Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: grinding, rolling, seam welding, flanging, tagging;  shearing.
•    Comply with health, safety (including OSHA), and environmental procedures, and ensures the cleanliness of the area.
•    Work in a team environment.
•    Continue to learn and expand one’s own capacity within this job by increasing knowledge and skill base.
•    Perform various other assignments per lead person or supervisor direction. 
POSITION REQUIREMENTS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential duties.
•    Strong mechanical ability
•    Knowledge of sheet metal layout (proper fittings), surface grinding and metallurgy.
•    Forklift experience.
•    Demonstrated commitment to quality and safety
•    Positive attitude and team-oriented
•    Willingness to learn the more complex aspects of the equipment operation involved within the round area and shear area.
•    Willingness to work in other areas as needed
•    History of dependability
•    Ability to thrive in a fast-paced environment with shifting priorities.

Knowledge, Skills and Experience
Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. Ability to complete written documentation. Ability to effectively communicate with co-workers and superiors.
 
Ability to apply basic math skills including adding and subtracting whole numbers and fractions. Ability to accurately read a tape measure to 1/32”.
 
Personal Attributes
•    Independent
•    Dependable; determined, positive in demeanor
•    Attention to detail.
•    Team player
•    Good attitude
Physical Demands  
 
•    Frequent standing, sitting, and use of hands in this support role is required
•    Specific vision abilities required to include close vision, and ability to adjust focus
•    Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) 
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
The noise level in the production area is usually moderately loud.  The Fabrication department is a sectioned off area of the production floor.  Various grinding, forming and welding tasks are performed within the Fabrication department.
 
•    Safety glasses and hearing protection are required when in the production area 
•    PPE covering eyes and skin is required when welding
•    PPE covering hands and face is required when grinding
•    PPE specific for certain tasks performed is required
•    Reinforced toed boots required  
 

Laser/Plasma Operator

JOB SUMMARY
A mid-level position in a production environment with some experience required. In this area, you’ll be required to: operate/set-up the laser, perform some inventory control duties, paperwork verification, label parts, coiling/shearing raw material, 5S and safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Under close supervision you’ll be introduced to a series of duties and responsibilities with increasing complexity to include, but not limited to the following:

  • Machine operation from set-up to shut down
  • Weekly clean-up duties and daily tool board checklists
  • Maintaining accuracy of parts and tooling maintenance
  • Inventory control, perform cycle counting of steel (sheet, coil and structural)
  • Scrap utilization and disposal
  • Troubleshooting equipment
  • Identify opportunities for process improvement
  • General housekeeping
  • Pre and post verification of all parts
  • Create a coil list after pre-verification
  • Legible marking of all parts
  • Learn all aspects of the Cut to length line “CTL” and shear
  • Perform various other assignments per lead person or supervisor direction
  • Comply with established production philosophies designed to increase production, safety and/or quality; e.g., Lean Manufacturing, 5s and TWI methodologies

POSITION REQUIREMENTS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

  • Strong mechanical ability
  • Knowledge of sheet metal layout (proper fittings), surface grinding and metallurgy.
  • Forklift certification (license)
  • Demonstrate a commitment to quality and safety
  • Willingness to learn the more complex aspects of the Laser operation
  • Willingness to work in other areas as needed
  • Ability to thrive in a fast-paced environment with shifting priorities
  • Comply with health, safety, (including OSHA), and environmental procedures, and ensure the cleanliness of the area.
 

Minimum Education, Certifications, and Qualifications

Three or more years related experience and/or training; or equivalent combination of education and experience.

Knowledge, Skills and Experience

  • Ability to read, analyze, and interpret written technical procedures and cut sheets as well as follow verbal instruction
  • Ability to apply basic mathematical skills to include decimals, fractions, and conversions
  • Measurement skills to include tape measure, sheet metal gauge, and dial calipers
  • Ability to identify problems collect information, establish facts, and suggest solutions

Personal Attributes

  • Independent
  • Dependable; determined, positive in demeanor
  • Attention to detail
  • Team player
  • Good attitude

Physical Demands

  • Frequent standing, sitting, talking, hearing and use of hands in this support role is required
  • Specific vision abilities required to include close vision, and ability to adjust focus
  • Occasionally perform physical activities including lifting (up to 50 lbs. unassisted)

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the production area is usually moderately loud. The Laser department is a sectioned off area of the production floor.

  • Safety glasses and hearing protection are required when in the production area
  • PPE specific to tasks being performed is required

Monday – Friday

$18.00 – $20.00/hr.

 

Why Choose Atlas Staffing?

Atlas Staffing is an employment agency that serves Tigard and its surrounding areas. We offer many great benefits for our temporary and temp-to-hire Staffing Associates! Beyond the paid sick leave and medical benefits that many of our positions qualify for, we also have a recruiting staff that is ready to find the type of work YOU are interested in. (Not to mention our Titan Rewards program!) If you are looking for a long-term career opportunity, then please apply now!

https://www.atlasstaffing.com

Atlas Staffing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status.

Drug-free workplace

 

Jeremy.Taylor

BR-Phoenix

Apply Now

  Apply with Google   Apply with Linkedin   Apply with Indeed